| |
|
Type BC Box Connectors
Box connectors are used to terminate Cabl-Bus at switchgear or other metal
structures and are furnished with all necessary hardware. |
 |
| |
|
|
Type EP Watertight Seals
These fittings form a weatherproof seal with walls and can also be used for
floor penetrations that must be watertight. Conductors are sealed with RTV
silicone sealant. Entrance fittings are furnished with all necessary hardware.
|
 |
| |
|
|
Type FS-RGS
FS-RGS seals are used where an absolutely watertight fitting is required.
Neoprene blocks are inserted after the cables are installed for ease of
pulling. They are UL Listed for a 2 and 3 hour fire rating and come with all
necessary hardware.
|
 |
| |
|
Type TB Tap Boxes
Tap boxes allow for intermediate load tapping. The design provides system
voltage rated air separation between live parts and adjacent surfaces to
eliminate the necessity tapping all energized components. The box consists of:
-
Aluminum framed enclosure
-
Removable covers (gasketed for outdoor applications)
-
Porcelain post stand off insulators Bus bars
|
 |
|
Electrical Connectors
Connectors are supplied for terminating cables at equipment and tap boxes, and
for the apparatus equipment with studs.
|
| |
|
Cable Terminating Kits
Termination materials are supplied for all Cabl-Bus systems of 5KV and above.
Tape and heat shrinkable kits are available for high voltage terminations up to
35KV. All kits are supplied with illustrated instruction sheets.
|